Acomplis Technology
Accutech Wrist Tag for LC1200 System 77L018
Accutech Wrist Tag for LC1200 System 77L018
Regular price
$165.00
Regular price
Sale price
$165.00
Unit price
/
per
• Accutech wander tags and wearables ship with the battery turned off. This allows for maximum useful battery life. The tag or wearable will need to be turned on using the ID-TAD or S-TAD before it is issued to a resident.
• An ID-TAD or S-TAD is required to activate your tag or wearable and is sold serarately.
• A small wristwatch sized tag device that is used with the Accutech LC wander management system; does not provide Resident Identification
• The tag sends a signal to wander controller or wand, typically mounted at door locations, hallways, or elevators, when it enters a monitored zone
• To confirm which model of system you have, check the model tag number on the bottom edge of the transmit wands (white bars) at the door location
• Internal battery is not replaceable. Engineered for 12+ months of continual usage. It can be deactivated with a Tag Activator/Deactivator to conserve battery when not in use
• Must be thoroughly cleaned between applications with antibacterial wipes or hydrogen peroxide
• Bands are for one time use only and should be replaced if damaged or worn. See Direct Supply part 0-56555 for replacement bands
• Testing can be done 3 ways: enter a monitored zone with tag (alarm may sound), with a Tag Activator/Deactivator (TAD), and with the Tag Test Station (TTS)
• Operation: Visual pulse LED indicates tag’s current mode; No LED – tag is off; Flashing LED – tag is active but not in monitored zone; Solid LED – tag is active and in a monitored zone
• Tags should be stored away from sources of electrical noise, in a metal container with a lid. Extra tags should be stored in a clean and dry environment
• Frequency: 418 MHZ transmit, 128-133 kHz receive
• Temperature: 32 degrees – 120 degrees F, intended for indoor use only
• Wrist Style Tag: 1¼” x 1½” x ½”
• Wheelchair Style Tag: 1½” x 1½” x ½”
• An ID-TAD or S-TAD is required to activate your tag or wearable and is sold serarately.
• A small wristwatch sized tag device that is used with the Accutech LC wander management system; does not provide Resident Identification
• The tag sends a signal to wander controller or wand, typically mounted at door locations, hallways, or elevators, when it enters a monitored zone
• To confirm which model of system you have, check the model tag number on the bottom edge of the transmit wands (white bars) at the door location
• Internal battery is not replaceable. Engineered for 12+ months of continual usage. It can be deactivated with a Tag Activator/Deactivator to conserve battery when not in use
• Must be thoroughly cleaned between applications with antibacterial wipes or hydrogen peroxide
• Bands are for one time use only and should be replaced if damaged or worn. See Direct Supply part 0-56555 for replacement bands
• Testing can be done 3 ways: enter a monitored zone with tag (alarm may sound), with a Tag Activator/Deactivator (TAD), and with the Tag Test Station (TTS)
• Operation: Visual pulse LED indicates tag’s current mode; No LED – tag is off; Flashing LED – tag is active but not in monitored zone; Solid LED – tag is active and in a monitored zone
• Tags should be stored away from sources of electrical noise, in a metal container with a lid. Extra tags should be stored in a clean and dry environment
• Frequency: 418 MHZ transmit, 128-133 kHz receive
• Temperature: 32 degrees – 120 degrees F, intended for indoor use only
• Wrist Style Tag: 1¼” x 1½” x ½”
• Wheelchair Style Tag: 1½” x 1½” x ½”